Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Released in June 2017 as a successor to the Surface Pro 4. Also known as Microsoft Surface Pro 12.3". Model number: FJT-00001.

Preguntas 26 Ver todo

Heat Gun/Blower for Screen Replacement

I am looking at purchasing a heat/gun blower to replace my Surface pro 5 screen (warm the adhesive to weaken it)....as well as for other electronics.

I have come across 3-in-1 Function Heat Blower and Soldering Iron (see link below), which I thought could be helpful with other projects also.

https://www.jaycar.co.nz/3-in-1-function...

Has anyone had any experience using this type of "heat blower"? First thought is it may be difficult to control the temperature...although it does have a flame adjustment setting.

Thanks in advance for your help.

Contestado! View the answer Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0

Comentarios:

Hi @dgmossman ,

You may wish to take note of the warning at Step.1 in the ifixit Microsoft Surface Pro 5 Screen Replacement guide.

Just a thought.

- de

Agregar un comentario

SALTEA LA ACTUALIZACIÓN

Ahorra reparando con un kit todo en uno.

Compra Kits de Reparación

SALTEA LA ACTUALIZACIÓN

Ahorra reparando con un kit todo en uno.

Compra Kits de Reparación

2 Respuestas

Solución Elegida

I think the soldering gun you picked will be to narrow an area and far to hot to do the job well. I believe you chances or success on this repair would be much greater with a standard heat gun:

Heat Gun

Imagen de Heat Gun

Producto

Heat Gun

$19.99

Fue útil esta respuesta?

Puntuación 2
Agregar un comentario

I would use the iOpener or a heatmat.

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Añadir tu respuesta

Daniel Mossman estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 7

Ultimos 30 días: 16

Todo El Tiempo: 540