Saltar al contenido principal

How do I install new bluetooth antenna

I have a new bluetooth board and that is easy to install but they unfortunately did not install the antenna at the factory?? So how do I install a new antenna (which can be purchased easily on e-bay) or more precisely where do I route the antenna and where do I attach the other end?

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación -1
Agregar un comentario

2 Respuestas

Solución Elegida

The bluetooth antenna is probably hiding in the corner. Here's the installation guide: iMac G5 20" Model A1076 Bluetooth board Replacement

See step 4 and look in the corner to the lower left of the card, it may be tucked under.

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario
Respuesta Más Útil

Kevin,

Every 20-inch iMac G5 I've been in has already had the cable. Did you pull out the power supply to make sure it wasn't tucked away somewhere it shouldn't be? Do a double take before trying to follow these instructions:

http://www.appleselfrepair.info/imac-g5-...

I didn't see a guide for this on iFixit but found that guide via google.

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Añadir tu respuesta

Kevin estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 1

Ultimos 30 días: 5

Todo El Tiempo: 1,742