Saltar al contenido principal

My PSP GO was bricked!

What can i do to repair it(Blue screen of Death)?

Flash0 / font accidentally deleted :(

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 2

Comentarios:

Does it just boot to a blue screen?

- de

Agregar un comentario

3 Respuestas

Solución Elegida

Make sure your charger is plugged in and press the O button to repair and restore default settings.

Fue útil esta respuesta?

Puntuación 2
Agregar un comentario
Respuesta Más Útil

If you are actually running a CFW on the PSP, than you should be able to boot it into recovery mode holding the right bumper, while turning it on. If you were using a HEN, and don't have a CFW installed, then you are kinda stuck with a brick, and might want to consider selling it for parts.

*EDIT* If you are using Custom FirmWare (CFW) and can boot the PSP into recovery mode, using the method above, and you can scroll over to Advanced>Toggle USB (flash0), connect it to your computer via USB, and replace the font file you deleted.

Fue útil esta respuesta?

Puntuación 3

Comentarios:

CFW = Custom Firmware - HEN = Homebrew ENabler: Basically if you are running stock firmware you are not able to get around Sony's limitations it is a paper weight. Unless you have CSW, Flash0 / font accidentally deleted :( = paper weight

- de

Agregar un comentario

I concur with ABCellars.

To clear BSOD try pressing o

The PSP will then attempt to repair itself by re--installing default settings to flash.

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Añadir tu respuesta

LORD MK estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 9

Ultimos 30 días: 42

Todo El Tiempo: 12,682