Saltar al contenido principal

Mediados de 2006 / número de modelo A1181 / carcasa negra o blanca / procesador Intel Core Duo de 1,83 o 2,0 GHz.

Preguntas 418 Ver todo

Doesn't turn on after disassembling for dust cleaning


It is not the first time I disassemble a computer. I have done it many times with my MacBook Pro.

But this time, I have done it for the first time on a Macbook A1181. I followed this guide to access the fan: MacBook Core Duo Fan Replacement

After reassembling the computer doesn't respond when I press the switch... :-(

I have checked the upper case cable (step 12) but it looks fine.

What should I do?



Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

2 Respuestas

Solución Elegida

Finally, I solved the problem by changing the upper case cable.

Unfortunately I couldn't buy on iFixit. I found it there:

And then followed this guide: MacBook Core Duo Upper Case Cable Replacement

Thanks for the help !

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario
Respuesta Más Útil

I think you hit it on the nose. Step #12 MacBook Core Duo Upper Case Replacement

That connector can be tricky.

To confirm, try disconnecting the battery and mag-safe adapter. Press and hold the power button for 10 seconds. Reconnect and see if you get a spontaneous reboot.

Fue útil esta respuesta?

Puntuación 3

1 comentario:

I did what you say. Unfortunately, it didn't change anything.

- de

Agregar un comentario

Añadir tu respuesta

poissonjerome estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 6

Todo El Tiempo: 130