Saltar al contenido principal

Lanzada en octubre de 2012, tiene una calificación general de 6,6 sobre 10 según cnet.com.

Preguntas 5 Ver todo

Why does a code is showing and I can not record videos?

When I turn on my camera it displays a code "E:62:10" and I can not record videos.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

2 Respuestas

Solución Elegida

Hi,

Error E: 62: 10 = Error initializing the lens, the image stabilizer block.

Apparently this is a problem with a lot of Sony cameras.

The lens focusing sensor has a problem because of the lens focusing gears are not working properly .

People have successfully tried give the camera (when it is turned off) a couple a sharp taps with the hand on the battery side of the case and this seems to have resolved it.

Otherwise you could take it to a reputable, professional camera repair service (experienced in Sony repairs) and ask for a quote to repair the camera.

Fue útil esta respuesta?

Puntuación 3
Agregar un comentario

Hi,  This is indeed a very well known problem with a lot of Sony camera's. Read http://sony-e-62-10.atspace.cc/. A temporary solution could be available at https://www.youtube.com/watch?v=S53D3EfD.... Hope this helps.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

MD Iqbal Hossain estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 6

Todo El Tiempo: 886