Repara tus cosas Comunidad Tienda

Modelo A1010 o A1104

Preguntas 99 Ver todo

Opciones

Why is my new Hard Drive not seen by Disk Utility?

I wish to replace the fully working 120GB HD with the upgrade 320GB WD3200BEVE drive to gain capacity.

When I fit the new blank HD, fresh from WD, and boot from a system DVD, the HD is not seen by System Profiler or Disk Utility.

I have used the same HD cable and this is the second drive with the same problem. If I refit the 120GB HD the machine works as normal.

I have checked for Firmware updates, there don't seem to be any for this machine.

Any advice please?

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación -1
Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

Well I fixed my own problem.

The previous owner was a tinkerer like us, and had fitted an HD ribbon cable which worked with a 120GB HD, but not with a larger drive. It may be faulty, or from another model. When I fitted a different cable 'borrowed' from another PB the new 320GB drive was seen as expected.

Fue útil esta respuesta?

Sí No
Puntuación 2
Agregar un comentario

Añadir tu respuesta

Cameron estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 895