Saltar al contenido principal

My front bumper is coming loose

I recently bout a used 2015 Hyundai Accent. The dealer pointed out that the front bumper was coming loose, and that it would be repaired. When I picked it up, he said that his guy had put a clip on it to fix it, and it did look repaired. Now it is loose again, and I am afraid that if it rubs up against something, it may get worse.

Before I go through the hassle of trying to get the dealer to repair the problem again, how could I fix the problem myself. It is on the passenger side, and the plastic separates for about 7 inches.

Thanks!

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

2 Respuestas

Respuesta Más Útil

gatewaynomad post some images of your loose bumper so we can see what you see. Use this guide Agregar imágenes a una pregunta existente for that. Most likely it is your bumper cover that is coming off. This from the manual:

  • Loosen the radiator upper cover mounting bolts and clips.

Block Image

  • Remove the mounting clips.

Block Image

  • After loosening the front bumper side’s mounting screw, then disconnect the side’s.

Block Image

  • Push the lock pin, disconnect the fog lamp connector (A).
  • Remove the front bumper.

Block Image

  • Installation is the reverse of removal

Fue útil esta respuesta?

Puntuación 1

1 comentario:

That is exactly what I wanted, thank you!

- de

Agregar un comentario

My left side bumper is also apart sticking out looks like missing a clip or broke clip.

Fue útil esta respuesta?

Puntuación 0

1 comentario:

Follow the same procedure listed above if you have the same car.

- de

Agregar un comentario

Añadir tu respuesta

gatewaynomad estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 14

Todo El Tiempo: 10,951