Rep: 33
2
1
Hello guys how are you doing
So i've been reparing phones for my self and my family
Almaot everytime I change a part especially the motherboard the motherbpard becomes so hot and battery drains fast, the phone gets slower too.
What's the reason in this case and how do I solve it
Es esta una buena pregunta?
Rep: 159.8mil
11
191
368
This is usually due to bad aftermarket shorted replacement parts. I get these a lot with rear cameras which I bought too cheap, all of them were faulty defects, dots on rear camera when testing, no focus issue, board shorting from the camera causing rapid fast hot battery drain.
How to solve it?
Get better quality parts from a supplier. For charging ports and front camera assemblies iPhone 6 and up I try to find the ones that have the apple logo printed on it for OEM quality.
I assume you unplug the battery before taking out the screen or any other ribbon cable.
Which is what you should do to avoid short circuiting on the logic board (e.g no backlight issue). (excludes home button for iPhone 5s).
Fue útil esta respuesta?
Ultimas 24 horas: 0
Ultimos 7 días: 2
Ultimos 30 días: 2
Todo El Tiempo: 55
2 comentarios
Thanks very much for these tips, I'll try them in the future because I'm willing to have a job, save money, then start cellphones repair business.
- de Mohanad Hatem
Also here's another tip, avoid using metal prying tool (use plastic if needed) when unplugging the battery connector to avoid accidentally conducting the metal points and shorting something on the board.
- de Ben