Difference between front panel assembly and LCD?

Question

iPad Mini 2 Wi-Fi

Guías para la versión Wi-Fi del iPad Mini 2. Anunciado el 22 de octubre y lanzado el 12 de noviembre de 2013. El iPad mini 2, también conocido como iPad mini con pantalla Retina, tiene todos los píxeles del iPad Air en un tamaño más pequeño de 7.9" factor de forma.

Preguntas 220 Ver todo

Martin @martin96791

Rep: 13

1

Publicado: 27 de dic. de 2016

Opciones

Difference between front panel assembly and LCD?

My iPad Mini 2 with retina works great, but for about a year now it has had a cracked screen. The crack is a clean break across the face of the center of the device.

Now I'm on iFixit trying to get a replacement, but I don't understand the difference between the front panel assembly and the LCD screen.

Which one do I need?

The picture on my iPad is crystal clear and all pixels work fine. The only problem is that the glass itself is cracked. Do I need to the pricier LCD screen, or will the front panel assembly do just fine?

Thanks,

Martin

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No

Puntuación 1

Agregar un comentario

1 Respuesta

Solución Elegida

Ben @benjamen50

Rep: 159.7mil

Mtwo Perform

11

191

368

Publicado: 27 de dic. de 2016

Opciones

Front panel assembly is essentially just the digitizer assembly, the touch screen layer which is fused together with the glass.

The LCD is not required however if you can separate the LCD from the housing of the iPad Mini without breaking or damaging it.

I recommend looking at this guide for reference at least:

Reemplazo del conjunto de panel frontal de iPad Mini 2 Wi-Fi

Fue útil esta respuesta?

Sí No

Puntuación 4

2 comentarios:

Thanks for your response. From what I understand from your reply, all I need is the front panel assembly, but ONLY if I can remove the inner LCD display from the front panel without breaking it.

How can this be done? Is it difficult to separate the front panel display from the LCD screen without breaking it?

Martin

27 de dic. de 2016 - de Martin

The LCD isn't glued together with the glass in any way.

It is actually stuck to the metal iPad Mini housing with adhesive.

The hard part is actually separating the LCD display panel from the iPad Mini itself where there is glue usually all around the edges of the LCD which are sticking to the metal plate under the LCD.

Reemplazo del conjunto de panel frontal de iPad Mini 2 Wi-Fi

27 de dic. de 2016 - de Ben

Agregar un comentario

Thanks for your response. From what I understand from your reply, all I need is the front panel assembly, but ONLY if I can remove the inner LCD display from the front panel without breaking it.

How can this be done? Is it difficult to separate the front panel display from the LCD screen without breaking it?

Martin — Martin
The LCD isn't glued together with the glass in any way.

It is actually stuck to the metal iPad Mini housing with adhesive.

The hard part is actually separating the LCD display panel from the iPad Mini itself where there is glue usually all around the edges of the LCD which are sticking to the metal plate under the LCD.

Reemplazo del conjunto de panel frontal de iPad Mini 2 Wi-Fi — Ben

iPad Mini 2 Wi-Fi

Difference between front panel assembly and LCD?

1 Respuesta

Añadir tu respuesta