Saltar al contenido principal

The HTC EVO is a Smartphone by HTC powered by a 1-GHz Snapdragon processor and runs the Android operating system.

Preguntas 92 Ver todo

How the heck do I fix the power dongle?

First, thanks for the site - bought a Torx set and got the back of the Evo open. My problem has to do with where the power cord - either a wall adapter or car adapter - attaches to Evo. I don't even know what to call the little piece the adapter slides into. BUT. That particular piece has broken off on my Evo. I can see where it goes, and where the connection points have to meet - but it clearly requires solder to repair. Right now the little metal receptor that is normally IN the phone stays on the end of my power adapter and I use rubber bands and voodoo to keep the charging connection active.

Suggestions? Any way for me to re-secure that thing?

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 2

Comentarios:

I noticed you never got an answer to this. Are you still having this problem?

- de

Agregar un comentario

1 Respuesta

Solución Elegida

I imagine you are talking about the power connector, which can be seen in this photo:

http://guide-images.ifixit.net/igi/5WFTB...

... bottom right, immediately below the vibration motor.

It's a surface mount component. If the board where it connects, and the loose power socket, are both undamaged, it probably could be resoldered back on with a hot air gun and a lot of care, much like soldering in SM IC's. A soldering iron will not be able to do this, it will just mess everything up. If you don't have the tools to repair this, a good repair shop could do it for you.

err, here is an amateur showing how it's done.

http://www.youtube.com/watch?v=yhhLyxkTV...

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Añadir tu respuesta

Rena estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 3,387