Repara tus cosas Comunidad Tienda

Información y guías de reparación para el iPhone 6 que salió a la venta el 19 de septiembre de 2014. Números de modelo: A1549, A1586 y A1589

Preguntas 4994 Ver todo

Opciones

How to reattach LCD flex cable to LCD

Block Image

I am operating a phone repair and lcd refurbishing center. I currently replace backlights, polarizers, and top glass on the displays but sometimes i am dealing with a fully functioning lcd that has the flex cables removed. How do I reattach the flex cables to the lcd and what kind of equipment is used? It would be a shame to get rid of a good lcd just because of the flex cable. Right now this question is centered around the iPhone 6 but any answers will be helpful.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 1
Agregar un comentario

3 Respuestas

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

Block Image

$4200+

or 148 genuine iphone 6 lcd's

Fue útil esta respuesta?

Sí No
Puntuación 4

6 comentarios:

:O that is amazing

- de

Hi,

I do oca refurbishing too and had a fully working i6 lcd that i refurbed and it had a broken flex connector. i figured that would of been too much work for what it's worth and i think it would be the same story with the flex cable. do you have a picture of which part?

- de

i updated the question to include the photo. Its disconnected right where it connects to the lcd itself

- de

if the cable was damaged you would struggle finding one and then attaching it if even possible. i would honestly just leave them to one side, the lcd's if original are worth £20 and it's certainly not worth the trouble surely? where abouts are you based?

- de

do not believe cable is damaged but if so I know where to get new cables. Im based in camp hill pennsylvania usa

- de

Mostrar 1 comentario más

Agregar un comentario

Opciones

Replacing the flex cable is 100% possible but not worth it unless you can do enough to cover the machine expense. It might be better to contact a place that buys screens in this condition.

Fue útil esta respuesta?

Sí No
Puntuación 2
Agregar un comentario

Opciones

The cable is clearly cut in half, you have to remove the stud on the LCD first

The equipment in question is called a pulse pressing machine, however I'm not sure of the success rate.

Fue útil esta respuesta?

Sí No
Puntuación 1

1 comentario:

i dont have it in front of me right now or i would take a picture but up close you can see the contacts. its not cut its just diconnected.

- de

Agregar un comentario

Añadir tu respuesta

Garrett Linebaugh estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 5

Ultimos 30 días: 26

Todo El Tiempo: 5,456