Rep: 9
1
• Tried Restart in Safe Mode. No joy.
• Tried Resetting PMU. No joy.
• Has a dead battery so, to date, have been operating on AC only
• Was in sleep mode before problem occurred
Es esta una buena pregunta?
Rep: 685.7mil
3.4mil
1.1mil
2.6mil
Three beeps = RAM problem
Reseat RAM first.
Fue útil esta respuesta?
Right + It's worth noting that these machines suffered from bad RAM slots on the logicboard. Try both slots, swap everything around and try with a single RAM in either slots.
good on ya fullas! will give that a go.
+
Ultimas 24 horas: 0
Ultimos 7 días: 0
Ultimos 30 días: 1
Todo El Tiempo: 1,630
2 comentarios
• Reseat RAM - No Joy
• Disconnect then re-connect PRAM - No Joy
- de RikiApa
It's still a RAM problem. Did you get new RAM?
- de mayer