Rep: 11
1
I replaced the screen on my gold 6 plus, I decided to put a black screen on Iit and everything went well until I turned the phone on and the screen was unresponsive to touch. Before complete installation I did test the screen and it worked . The screen has light lines running down the screen please help
Es esta una buena pregunta?
Rep: 102.5mil
18
191
304
I would take the phone apart again and get it to were it worked before then re assemble slowly and with care checking when possible if it works to know when things go wrong.
Fue útil esta respuesta?
Rep: 2.2mil
4
4
1
Sounds like the digitizer flex cable or socket on the board may be damaged. I would inspect those areas under a microscope.
Fue útil esta respuesta?
Could also be a short , did you put all the insulating tape back on?
When I extend the flex cable while it's plugged in the screen becomes clearer, but still lines going through
Rep: 1
5
4
Your digitizer flex isnt properly plugged in most likely.
Fue útil esta respuesta?
When I extend the flex cable while it's plugged in the screen becomes clearer, but still lines going through
Rep: 109
3
2
Fue útil esta respuesta?
Ultimas 24 horas: 0
Ultimos 7 días: 7
Ultimos 30 días: 7
Todo El Tiempo: 335
2 comentarios
Does the home button work?
- de Jimfixer
I didn't attach the home button backing plate yet because I have a stripped screw and ordered a new plate, but the touch id was still funtioning
- de Josh B