Released on September 19, 2014, this 5.5" screen iPhone is the larger version of the iPhone 6.

Preguntas 1389 Ver todo

My iPhone 6plus is over heating and screen will not work?

I got my iPhone 6plus wet, not a lot but still wet. I dried it off and it was working fine, then it started to to crazy random stuff with screen after i plunged it in to charge. The screen eventually quit working all together with in minutes and it gets crazy hot on the back of the phone where all the connectors are for the screen. I have completely removed the logic board and soaked it in 93% rubbing alcohol for 3 days let dry for three days resembled and it still doesn't turn on but gets really hot still when I plug it in. Whats my next step? Trash it, or is there still hope?

Contestado! View the answer Yo también tengo este problema

Es esta una buena pregunta?

Calificación 1
Agregar un comentario

¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

Visita Nuestra Tienda

1 Respuesta

Solución Elegida

Bean, more than likely the heat is being generated by an electrical short. The minerals in water will cause corrosion that will build up and eventually start to bridge components and connectors that should be isolated. To find out if this is the case, you will have to examine the logic board under a microscope or if you don't have one, then use the strongest magnifying glass that you can find. Their is some protective tape that surrounds the LCD, Digitizer connectors. That tape can be removed from the logic board, do it carefully so that you can reuse it later when reassembling. Once tape is removed you can view the solder joints for the different connectors, Look for corrosion around the LCD and Digitizer connectors as well as all other parts that are on logic board that are not covered with the metal heat shields(both on the logic board and on the end of the flex cable). If you find some, then use a fiberglass scratch pen or soft toothbrush to remove corrosion. Rinse with alcohol.

Water and electricity are a bad combination. If corrosion is not the problem, then you may have board level issues such as a blown filter, ect.

Fue útil esta respuesta?

Calificación 1

Comentarios:

Also, the battery will have to probably be replaced. The now shorted out battery is another candidate for the source of heat that is occurring when the phone is plugged in.,

por

Agregar un comentario

Añadir tu respuesta

Bean estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 193