Rep: 37
2
1
One of the activators has been forced while it was stuck. This resulted in the perforation of the top of the small plastic cylinder which holds a spring. As a result the lach is loose and does not play its role of actionating the switch. I need to buy the broken parts. Where can I find it ?
Es esta una buena pregunta?
Rep: 43
2
I dis-assembled as per insstruction, and found one of the two activators to be broken. Ordering and receiving can take some time, so in the interim, I cut the red and black wires and marred them together. The activators are wired in series so that works well until I get another.
Fue útil esta respuesta?
Called the service number. They will not sell or provide the springs or switch parts to repair. You can buy an entire base for $50. NO THANKS!!
Rep: 1
1
You may contact Nutribullet Customer Service Department at 855-346-8874 for assistance on using the product or warranty service. (Mon– Sun, 9am–8pm EST). You will be required to provide the barcode and serial number located underneath your Motor Base
Fue útil esta respuesta?
Jose Rivera, your response does not answer the question at all. ifixit is not about referring to the manufacturer but about how to fix it yourself. Ever tried to get the manufacturer to fix their appliances.?
Rep: 15.9mil
74
12
42
Doesn't look like you can buy replacement contact switches easily and online - I think wiring the switches in series will prolong the life of the blender without compromising safety.
Fue útil esta respuesta?
Ultimas 24 horas: 2
Ultimos 7 días: 17
Ultimos 30 días: 44
Todo El Tiempo: 1,745
1 comentario
Abdel add some images of what and where it is broken. Use this guide Agregar imágenes a una pregunta existente to add those
- de oldturkey03