Saltar al contenido principal

Capacitor replacing on iPhone 5

Hello.

I've replaced the "Audio Control and Power Button Cable", thank you very much for the step-by-step.

As I almost finished, my screwdriver slipped and I've removed a couple of capacitors (I think that's what they are).

Here is a picture, it's right next to the battery connector:

Block Image

Can someone help me to identify so I can (hopefully) re-solder them?

Thank you.

Peter.

Update

Hello oldturkey03.

I'm just trying to see if these are the parts needed:

Block Image

The manufacture codes are C0402C0G1C560J020BC for C279 and MMZ0402S121C for the FL11.

Thank you.

Peter.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 1
Agregar un comentario

3 Respuestas

Solución Elegida

Peter, that is reference designator FL11 is a 120ohm 210mA inductor in a 01005 package and

reference designator C279 is a 56PF 16V 5% capacitor in a 01005 package. Hope this helps, good luck.

Block Image

Fue útil esta respuesta?

Puntuación 5

6 comentarios:

Hi oldturkey03. Thank you for the info. I'm trying to get the parts. £0.18 for a part and £12 delivery :(

- de

Hello oldturkey03.

I'm just trying to see if these are the parts needed:

The manufacture codes are C0402C0G1C560J020BC for C279 and MMZ0402S121C for the FL11.

Thank you.

Peter.

- de

Hi guys! where you buy this parts? please help me crushedrepepper@gmail.com

- de

CRUSHED RED PEPPER, they are available at digikey.com

- de

What does this look like on the iPhone 6?

- de

Mostrar 1 comentario más

Agregar un comentario

FL 11 is required and will have to get back in place for the phone to work. Honk if you need microsoldering assistance.

jessa

Fue útil esta respuesta?

Puntuación 4

3 comentarios:

Hi jessabethany. Thank you for the comment and support :)

I will probably need some assistance as soon as I get the parts.

- de

Hi Jessa,

can you confirm me, that there are "unnecessary" parts in this section?

I ask because I ripped off 2 parts there, but the phone is working. Cant see any bug so far.

Maybe I ripped of 2 capacitors, that was used to smooth voltage-fluctuations, as I remember they are often near to power-supplys.

greetz revnu

EDIT: even if my assumption is right, what type of long term-effect I can expect bye missing smoothing-caps?

- de

Have the FL11 and C270 pry damage on a 5C. What you will encounter is

- Battery gas gauge is incorrect

- Cellular call radio lose like 5-10dB signal strength

- de

Agregar un comentario

wow! you guys rock….

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Peter estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 3

Todo El Tiempo: 15,306