Rep: 1
1
I have changed the inverter cable and inverter and screen still dark. comes on for a sec or so then goes blank. is there any other possible problem other than thinking the only next step would be to change the screen?
Es esta una buena pregunta?
Rep: 784.8mil
1.1mil
894
2.3mil
llnetnet, since you already changed the inverter and the cable but only get backlight for a brief moment, it is most likely that you are having CCFL issues which would require you to replace the LCD. The only other possibility would be the power coming from the logic board to the invert having issues. That would be a board level repair and difficult to diagnose without the proper serial number. The serial number will allow us to determine what hardware your computer has.
Fue útil esta respuesta?
Ultimas 24 horas: 0
Ultimos 7 días: 0
Ultimos 30 días: 2
Todo El Tiempo: 62
4 comentarios
Can you give us the last four digits of your serial number so we can identify which model you have.
- de Dan
Can you see the desktop screen by shinning a flashlight on it?
- de mayer
1181 for model number and yes I can see screen underneath. Have it hooked up to an external monitor to use the laptop. I have the a1181
- de llnetnet
A1181 for computer model. And yes see screen with light
- de llnetnet