CDMA version of the fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. 16 or 32 GB / Model A1349 / CDMA compatibility.

Preguntas 421 Ver todo

What is the best tool to use for the standoff screws?

the bloody standoff screws in the iphone 4 are so hard to find a good fitting tool for! What is the best tool that someone has found to handle the standoff screws???

Contestado! View the answer Yo también tengo este problema

Es esta una buena pregunta?

Calificación 2
Agregar un comentario

4 Respuestas

Solución Elegida

I take a small Phillips and grind it down flat and that allows me to have connections at all 4 slots. I find the flathead slips out a lot and harder to put back in with flathead.

Fue útil esta respuesta?

Calificación 2

Comentarios:

Excellent solution. This really works.

por

Agregar un comentario

You can find all the repair tools on ifixit. You can see the iPhone 4 tear down and can see the tools.

Fue útil esta respuesta?

Calificación 1
Agregar un comentario

Very small slotted (flat) head screwdriver.

Fue útil esta respuesta?

Calificación 0

Comentarios:

1.5mm flat head has been my preferred choice

por

Agregar un comentario

Since you asked this question, iFixit added a special standoff bit to their tools catalogue.

iPhone Standoff Screwdriver Bit (Item code: IF145-343-1)

I use a 'STANLEY 63-310 U.S.A.' pocket slotted screwdriver for this task. It is good, though not perfect: its blade is just slightly wider than screw head, so it will collide into nearby components. I need to slide it slightly after every half turn, so it overhangs clear/free area, instead of overhanging populated area and bumping into parts.

Fue útil esta respuesta?

Calificación 0
Agregar un comentario

Añadir tu respuesta

Stephen Jennings estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 9

Todo El Tiempo: 936