Saltar al contenido principal

Model A1181: 1.83, 2, 2.1, 2.13, 2.16, 2.2, or 2.4 GHz Core 2 Duo processor

Preguntas 1475 Ver todo

DC in board Problem

My battery wasn't charging so I decided to replace dc in board . But It isnt disconnecting from logic board . Is it attached with glue or something .. I have tried alot but not disconnecting.. Is there any particular way to unplug it ??

Contestado! View the answer Yo también tengo este problema

Es esta una buena pregunta?

Calificación 0
Agregar un comentario

1 Respuesta

Solución Elegida

The A1181 MacBooks don't have a DC in board as such unlike the A1342 MacBook model. The connector is soldered to the main logic board.

Did you try cleaning the connects and check to see if a second power adapter with Isopropyl alcohol and cotton swabs (Q-Tip)?

I suspect you have a burnt FET which is a common issue. Static discharge (ESD) often kills them.

Fue útil esta respuesta?

Calificación 2

Comentarios:

The A1181 and the A1342 have the same DC in socket soldered to the logic board and use the same black connector type.

por

lemerise - the Unibody models have a plug in Mag-Safe connector unlike the older Poly-Carb units. Checkout this pic DC-in board connector

por

I haven't tried anything yet . Can you please tell me how to clean it .

por

And what is its solution?? What do i do now ?

por

Samuillah - Sorry to say you can't replace the Mag-Save connector on this model as its part of the logic board. You will need to replace the logic board if the connector is damaged.

por

Mostrar 8 comentarios más

Agregar un comentario

Añadir tu respuesta

Samiullah estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 130