Repara tus cosas Comunidad Tienda

Preguntas 2522 Ver todo

Opciones

Can you replace the battery connector on the logic board?

So I do my own electronic fixes using YouTube, Google, iFixit, etc.

Recently I replaced the midframe on my Verizon iPhone 5. In the final steps, while connecting the battery to the logic board, I broke the plastic edge on the side facing the right. Now the battery won't charge and when connected to power, it powers on for about five seconds to the apple logo, then shuts off, only to repeat itself over and over. Can you take the connector off the logic board and put a new one on? I didn't see any way when I was looking at it.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación -1
Agregar un comentario

2 Respuestas

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Respuesta Más Útil

Opciones

You can do it, but it is very hard and requires microsoldering. Also, you would need to be able to find the part.

Fue útil esta respuesta?

Sí No
Puntuación 1

1 comentario:

I have the clip. I just didn't know if you could do it. I can solder, but I've never done micro-soldering and I believe that this project is out pf my skill range. Haha. I'll have to look into it. Thank you.

- de

Agregar un comentario

Opciones

Battery connector replacements are very quick and easy once you've done a few and learned things the hard way a few times---if you have the right equipment --easy. If not, get the guy who does have the right equipment to do it for you--$20 on eBay specialty services

Fue útil esta respuesta?

Sí No
Puntuación 1
Agregar un comentario

Añadir tu respuesta

Trevon Buckman estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 1,047