Saltar al contenido principal

Versión CDMA del iPhone de cuarta generación. La reparación es sencilla, pero el cristal frontal y la pantalla LCD deben reemplazarse como una unidad. Compatibilidad de 16 o 32 GB / Modelo A1349 / CDMA.

Preguntas 295 Ver todo

I can still see the screen but it is very dark.

My sister gave me her iPhone 4 because she thought the screen was broken. If you look carefully you can still see the background and you can make it work, but you have to use the reflection from a light to see what you are doing. I turned the brightness up all the way but it is still dark, so technically the screen is working.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación -1
Agregar un comentario

1 Respuesta

Solución Elegida

JoeJackson, yes the screen is working from a data aspect, however, the backlight is not. The actual backlight is contained in the LCD assembly, but the inverter circuit and the control are located on the logic board. I would start off by replacing the complete display assembly first. Follow this guide for that. Check your logic board for any charred, burned or missing components. This model does use a coil and an IC to control the backlight, but those are very small components on the logic board. To repair those would require good soldering skills. Check this question for the location of the coil as well as the IC. Hope this helps, good luck.

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Añadir tu respuesta

JoeJackson estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 117