Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

eMachines 2220 desktop computer.

Preguntas 4 Ver todo

cannot get my system to reboot

Hi there,i purchased the above system in the uk 5years ago. after the power supply blew and fried the motherboard i got both replaced,recently i done a system restore and the system would not reboot,showing the message

/Windows/system32config/windows file is missing or corrupt.

it says i may be able to repair it by running the set-up media that i recieved with my purchase but i cannot find my original set-up media. is there any way that i can get the system back working or will i have to purchase a new copy of

WINDOWS XP.

YOURS JOHNNYP

Contestado! View the answer Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

5 Respuestas

Solución Elegida

Contact eMachines and see if they will sell you a copy of the original setup disk. If they won't buy a OEM copy of XP with a new COA and install that. Ralph

Fue útil esta respuesta?

Puntuación 3

Comentarios:

thanks for your answer.will try as suggested

- de

Agregar un comentario

I've come across a number of 2220 boards and many Dell boards that were populated with defective Rubycon electrolytic caps. Recapped 16 such boards already and now they work just fine.

Look at the motherboard very closely with a flashlight and see if any of the caps are swollen on the top where that "X" is cut into the top. Some may pop out the bottom. If any look like that then I suspect the board is defective.

The 1800 ufd 6.3 vdc caps are notoriously suspect. They were counterfeits as well as other values on the board.

Fue útil esta respuesta?

Puntuación 0

Comentarios:

great advise and excellent repair, but the repair on this particular one was strictly software related.

- de

Agregar un comentario

You can attempt to do a system recovery (it will reset the computer to factory specs) from the boot menu. Here is a link to a website that will give you step by step instructions. I hope this helps.

http://www.ehow.com/how_6904280_do-syste...

Fue útil esta respuesta?

Puntuación 0

Comentarios:

Good answer to an almost 2 year old question.:)

- de

Thank you for your response.

- de

Agregar un comentario

If you have access to another PC with a CD/DVD burner download a copy of the Ultimate Bootdisk and copy the ISO file to a CD. Botup from that CD and use one of the HD diagnostics to test the HD first to be sure the HD isn't fried before you invest in the oem or the system dsiks from emachines.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

I got my late Mom-in-Law's "e" computer with a startup issue. The caps are fine, and my Linux live disks are working in it fine. The Ultimate Bootdisk mentioned above would have the same effect, with the advantage of having the diagnostic tools readily available.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

john pullar estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 3,895