Saltar al contenido principal

2.3L 4cil o 3.0L V6, 6ª generación

Preguntas 428 Ver todo

The radio is reading code 1

i took the battery offf to replace it and now the radio wont work it reads code 1? what do i do

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 2
1 comentario

You'll need an unlock code, which you can get here: https://radiocodevault.com/honda

- de

Agregar un comentario

1 Respuesta

Solución Elegida

pat joy, you need to reset your radio code. You could give this a try:

  1. Hit <enter> to insert another list item, and <enter> twice in a row to end the list. To get subitems, repeat the bullet character once for each level of indent you want (e.g. ##)Turn car to ON II(radio powers up)
  2. Hit <enter> to insert another list item, and <enter> twice in a row to end the list. To get subitems, repeat the bullet character once for each level of indent you want (e.g. ##)Turn radio off
  3. Hit <enter> to insert another list item, and <enter> twice in a row to end the list. To get subitems, repeat the bullet character once for each level of indent you want (e.g. ##)
  4. Hold 1 & 6 buttons on radio
  5. Hit <enter> to insert another list item, and <enter> twice in a row to end the list. To get subitems, repeat the bullet character once for each level of indent you want (e.g. ##)While still holding 1 & 6, turn radio on
  6. Hit <enter> to insert another list item, and <enter> twice in a row to end the list. To get subitems, repeat the bullet character once for each level of indent you want (e.g. ##)Write down the 8digit number that should display

Call your Honda dealer and give them those numbers. Or just follow the directions on here. Hope this helps, good luck.

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Añadir tu respuesta

pat joy estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 4

Ultimos 30 días: 11

Todo El Tiempo: 10,617