Introducción

This will guide you through the replacement of your controller port.

Partes

No se requieren partes.

Remove the parallel port cover on the back of the PlayStation.
  • Remove the parallel port cover on the back of the PlayStation.

The SCPH-9001 model does not have the Parallel Port panel to remove.

Aislinn - Contestar

Flip over the PlayStation and remove the six screws from the bottom.
  • Flip over the PlayStation and remove the six screws from the bottom.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Turn the PlayStation upright. Remove the cover by lifting it up.
  • Turn the PlayStation upright. Remove the cover by lifting it up.

Agregar Comentario

Remove the two screws securing the controller port to the case. Remove the two screws securing the controller port to the case.
  • Remove the two screws securing the controller port to the case.

Agregar Comentario

Gently disconnect the ribbon cable from the logic board. This is done by pulling on the blue area of the cable near the connector.
  • Gently disconnect the ribbon cable from the logic board. This is done by pulling on the blue area of the cable near the connector.

Agregar Comentario

Remove and replace the controller port.
  • Remove and replace the controller port.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

6 personas más completaron esta guía.

JakeDeschamps

Miembro Desde 28/10/09

970 Reputación

6 Guías creadas

Equipo

Cal Poly, Team 5-2, Regan Fall 2009 Miembro de Cal Poly, Team 5-2, Regan Fall 2009

CPSU-REGAN-F09S5G2

5 Miembros

6 Guías creadas

I try replacing the controller and still wouldn't play memory cards.

redevil19 - Contestar

I changed the controller port but the psx still doesn't recognize any controller. Both controller port and ribbon cable work perfect in other console. I wonder which components on the mother board are related with the controller ports so I can check them with a tester.

Daniel Prieto - Contestar

I replaced the PS605 fuse and now the controllers work again! Thanks to this video https://www.youtube.com/watch?v=HdULot5F...

Daniel Prieto -

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 2

Últimos 7 Días: 22

Últimos 30 Días: 95

Todo El Tiempo: 17,859