Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 2 guías que incluyen este paso.
Traduciendo paso 3
Paso 3
-
Pull out the hard drive cable from the hard drive, and set it aside.
-
Remove the four 3.0 mm screws that attach the hard drive case to the hard drive using a Philips #1 Screwdriver. If the screwdriver is too big, try #0 sized screwdriver.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.