Repara tus cosas Comunidad Tienda

Retina MacBook 2016 底盖总成开启

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 25 guías que incluyen este paso.

Volver a la Guía
Inglés
Chino
Paso 2
Retina MacBook 2016 Opening Lower Case Assembly: paso 0, imagen 1 de 3 Retina MacBook 2016 Opening Lower Case Assembly: paso 0, imagen 2 de 3 Retina MacBook 2016 Opening Lower Case Assembly: paso 0, imagen 3 de 3

  • Wedge your fingers between the upper case and the lower case, starting from the rear of the MacBook between the hinges.

  • Lift the lower case only slightly to avoid damaging the cables that connect the lower case to the upper case.

  • Keeping a firm grip, lift steadily until the lower case separates slightly from the upper case.

  • You may experience a lot of resistance when lifting the lower case. If necessary, slide an opening pick or other ESD-safe pry tool down the side edges of the lower case to pop the two hidden retaining clips free.

  • During reassembly, to re-engage the clips, press firmly near both side edges of the lower case (near where the pick is inserted in the third image) until you hear the clips snap into place.

将你的手指从MacBook的铰链后部开始，插入上壳和下壳之间。

只轻微地抬起下壳，以避免损坏连接下壳和上壳的电缆。

紧紧握住，稳定地提起，直到下壳与上壳略微分离。

在抬起下壳时，你可能会遇到很大的阻力。如有必要，可以沿着下壳的侧边滑动一个开启工具或其他防静电撬棒，以弹开两个隐藏的保持夹。

在重新组装时，为了重新固定夹子，需要在下壳的两侧边缘（靠近第三张图片中插入撬棒的地方）用力按压，直到听到夹子咔嗒一声卡入位。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.