Repara tus cosas Comunidad Tienda

Retina MacBook 2016 底盖总成开启

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 25 guías que incluyen este paso.

Volver a la Guía
Inglés
Chino
Siguiente paso

Traduciendo paso 1

Paso 1
Retina MacBook 2016 Opening Lower Case Assembly, Unfasten the lower case: paso 0, imagen 1 de 1
Unfasten the lower case

  • Before proceeding, unplug and power down your MacBook. Close the display and lay it on a soft surface, top-side down.

  • Remove the following eight screws securing the lower case:

  • Two 1.8 mm P5 Pentalobe screws

  • Four 2.9 mm P5 Pentalobe screws

  • Two 6.1 mm P5 Pentalobe screws

  • Note the orientation of the screws as you remove them—they need to be reinstalled at a slight angle.

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your device.

松开底壳

在开始之前，请拔掉电源并关闭您的MacBook。关闭显示屏，并将其置于柔软的表面上，屏幕朝下。

拆除八颗固定底壳的螺丝：

两颗1.8毫米P5五星形螺丝

四颗2.9毫米P5五星形螺丝

两颗6.1毫米P5五星形螺丝

注意在拆卸螺丝时的方向——重新安装时需要将其稍微倾斜。

在整个修理过程中， 请保管好每一个螺丝 ，并确保将其准确地放回原位，以避免损坏您的设备。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.