Saltar al contenido principal

Canon PowerShot A1000 IS Teardown

Inglés
Español
Paso 21
Canon PowerShot A1000 IS Teardown: paso 0, imagen 1 de 3 Canon PowerShot A1000 IS Teardown: paso 0, imagen 2 de 3 Canon PowerShot A1000 IS Teardown: paso 0, imagen 3 de 3
  • Remove the epoxy from the three coarse thread screws. Slowly loosen the three screws a little bit at a time. There are three springs underneath the metal plate that you might not want to launch. First time I did this I lost two of the three. The pink looking lens is a filter, if you turn the lens over it will fall out o be careful if you want to keep it.

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.