Saltar al contenido principal
Inglés
Español
Paso 7
Continue peeling away the backing from the adhesive, gently pressing the adhesive into place from the bottom of your iPhone to the top. If you correctly aligned the lower edge of the adhesive, the side and top edges will fall perfectly into place. If the adhesive is misaligned, remove it and start over with fresh adhesive. If you don't have another set of adhesive strips handy, it's okay to temporarily put your iPhone back together and use it normally without any adhesive. Just keep in mind that your iPhone's water resistance will be compromised until you replace the adhesive.
  • Continue peeling away the backing from the adhesive, gently pressing the adhesive into place from the bottom of your iPhone to the top.

  • If you correctly aligned the lower edge of the adhesive, the side and top edges will fall perfectly into place. If the adhesive is misaligned, remove it and start over with fresh adhesive.

  • If you don't have another set of adhesive strips handy, it's okay to temporarily put your iPhone back together and use it normally without any adhesive. Just keep in mind that your iPhone's water resistance will be compromised until you replace the adhesive.

Continúa removiendo la parte posterior de el adhesivo, con cuidado presionando el adhesivo en su lugar desde la parte inferior de tu IPhone hasta la parte superior.

Si has alineado correctamente el borde inferior del adhesivo, el lado y el borde superior caerán perfectamente en su lugar. Si el adhesivo esta desalineado, remuévelo y reinténtalo nuevamente con un adhesivo nuevo.

Si no tienes cerca otro set de adhesivo, esta bien reensamblar tu IPhone temporalmente y usarlo normalmente sin ningún adhesivo. Solo ten en cuenta que la resistencia al agua de tu IPhone estará comprometida hasta que reemplaces el adhesivo.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.