Saltar al contenido principal

Reemplazo de la pantalla de Samsung Galaxy S8

Inglés
Español
Paso 3
Samsung Galaxy S8 Screen Replacement: paso 0, imagen 1 de 1
  • Once the screen is warm to the touch, apply a suction cup as close to the heated edge of the phone as you can while avoiding the curved edge.

  • The suction cup will not make a good seal on the curved portion of the glass.

  • If the phone's screen is cracked, the suction cup may not stick. Try lifting it with strong tape, or superglue the suction cup in place and allow it to cure so you can proceed.

  • Lift on the suction cup and insert an opening pick under the display assembly.

  • Due to the curved glass, you will be pushing up, rather than inserting parallel to the plane of the phone.

Una vez que la pantalla se sienta calienta al tacto, aplica una ventosa lo más cerca posible al borde calentado del teléfono evitando el borde curvado.

La ventosa no realiza un buen sellado en la parte curvada del cristal.

Si el vidrio está roto, la ventosa podría no pegarse. Intenta levantarla con cinta de alta resistencia, o pon pegamento en la ventosa para pegarla bien y permitirte proceder.

Intenta levantar el cristal con la ventosa. Introduce la herramienta plástica por debajo del cristal.

Debido al vidrio curvo, empujarás hacia arriba, en lugar de insertarlo en forma paralela al plano del teléfono.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.