Saltar al contenido principal
Inglés
Español
Paso 3
Peel up the sticker covering the interconnect cable on the daughterboard side. Use a spudger to disconnect the cable from the daughterboard. Remove the cable from the device.
  • Peel up the sticker covering the interconnect cable on the daughterboard side.

  • Use a spudger to disconnect the cable from the daughterboard.

  • Remove the cable from the device.

  • During reassembly, make sure this interconnect cable is positioned correctly. The phone will not boot up if the cable is installed upside down.

Usa un spudger para desconectar el cable plano del puerto de carga de la placa madre.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.