Saltar al contenido principal

Hasbro Bop-It Micro Series Back Case Replacement

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 3 guías que incluyen este paso.

Inglés
Chino
Paso 2
Hasbro Bop-It Micro Series Back Case Replacement: paso 0, imagen 1 de 1
  • Remove the six 6 mm screws from the back cover using a Phillips #0 screwdriver.

  • When removing the final screw, hold the assembly together. There is a spring inside the device which will pop the assembly apart when all the screws are removed.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.