Aviso: Ahora estás editando un requisito previo de la guía que estabas viendo. Cualquier cambio que realices afectará a todas las 2 guías que incluyen este paso.
Traduciendo paso 21
Paso 21
-
Remove the following two Phillips screws from the side of the camera with the three connector ports with a Phillips head screwdriver:
-
One 2.5mm screw
-
One 3.3mm screw
-
Pull the metal shield away from the camera.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.