Saltar al contenido principal
Inglés
Español
Paso 10
Several Torx T10 screws hold the logic board in place. We make short work of them. If you want to remove the board, you have to snake it out from the rest of the iMac -- a combination of pulling up, as well as away from the casing. After a little bit of jiggling, it comes right out.
  • Several Torx T10 screws hold the logic board in place. We make short work of them.

  • If you want to remove the board, you have to snake it out from the rest of the iMac -- a combination of pulling up, as well as away from the casing. After a little bit of jiggling, it comes right out.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.