Repara tus cosas Comunidad Tienda

Remplacement des haut-parleurs Canon Powershot A610

Volver a la Guía
Inglés
Francés
Paso 3
Canon Powershot A610 Speaker Replacement: paso 0, imagen 1 de 1

  • Open the battery cover.

  • Remove the four screws inside.

  • One screw is located on the top side of the bottom cover. The remaining three screws are located at the bottom of the battery compartment.

  • Close the battery cover.

Ouvrez le couvercle de la batterie.

Localisez et retirez les quatre vis à l'intérieur.

Une vis est située sur le côté supérieur du capot inférieur. Les trois vis restantes sont situées au bas du compartiment des piles.

Fermez le couvercle de la batterie.

[* black] Open the battery cover.
-[* black] Locate and remove the four screws inside.
-[* red] One screw is located on the top side of the bottom cover. The remaining three screws are located at the bottom of the battery compartment.
+[* red] Remove the four screws inside.
+[* icon_note] One screw is located on the top side of the bottom cover. The remaining three screws are located at the bottom of the battery compartment.
[* black] Close the battery cover.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.