Introducción

The speaker is on the underside of the top casing and will involve some minor technical skills.

Partes

No se requieren partes.

  1. Locate and remove the three screws attaching the side panel.
    • Locate and remove the three screws attaching the side panel.

    • Remove the side paneling and the two remaining screws attached to the frame of the camera.

    Agregar Comentario

  2. Remove the two screws on the bottom panel of the camera.
    • Remove the two screws on the bottom panel of the camera.

    Agregar Comentario

    • Open the battery cover.

    • Locate and remove the four screws inside.

    • One screw is located on the top side of the bottom cover. The remaining three screws are located at the bottom of the battery compartment.

    • Close the battery cover.

    Agregar Comentario

    • Open the "DIGITAL AV OUT" door on the camera.

    • Remove the three screws. The door can be removed from the camera.

    Agregar Comentario

    • Gripping the sides of the top cover, gently pull apart the top cover from the camera.

    • The top cover does not completely detach.

    Agregar Comentario

    • Open the battery cover.

    • Gently pull apart the front cover from the camera.

    • This may require some force. Be careful not to break the plastic.

    Agregar Comentario

    • Using a thin tool, push the black attachment away from the white connection piece to detach the connector ribbon.

    Agregar Comentario

    • Remove the 3mm screw holding the metal frame.

    Agregar Comentario

    • Use an unfolded paper clip to push the speaker from the top of the casing out towards the bottom.

    • You may need to use a bit of force as the speaker be glued in to the top casing.

    • There is a soft fabric speaker cover separating the speaker from the casing. Make sure not to remove it from its position in the housing.

    Agregar Comentario

    • Unsolder the speaker at two points and reattach the new speaker.

    Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

Cal Poly, Team 11-26, Maness Winter 2011 Miembro de Cal Poly, Team 11-26, Maness Winter 2011

CPSU-MANESS-W11S11G26

3 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 1

Todo El Tiempo: 2,653