Nikon COOLPIX P500 Motherboard Replacement

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 2 guías que incluyen este paso.

Inglés

Holandés

Traduciendo paso 3

Paso 3

Separate the two parts of the body of the camera slightly.
Release the two cables by lifting up their respective clips with a spudger.
Make sure not to pull too hard because there are connector ribbons.
Detach the connector ribbons before fully separating the camera into two pieces.
These pictures were taken after the connector ribbons were released and the camera was separated into two parts. You will need to release the connector ribbons while the camera is still in one piece before you can separate it like the pictures.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.