Saltar al contenido principal

Nintendo 2DS リアパネルの交換

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 5 guías que incluyen este paso.

Inglés
Japonés
Paso 2
Nintendo 2DS Rear Panel Replacement: paso 0, imagen 1 de 1
  • The rear panel is attached to the motherboard by a ribbon cable, so be careful not to lift the rear panel too far from the device.

  • Carefully pull the rear panel straight up from the device.

後面パネルはリボンケーブルでマザーボードと接続されているので、デバイスから持ち上げるときは離れすぎないように気を付けてください。

デバイスから後面パネルを慎重に垂直に引き上げます。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.