Repara tus cosas Comunidad Tienda

Remplacement du panneau avant du Xbox 360 E

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 5 guías que incluyen este paso.

Volver a la Guía
Inglés
Francés
Paso 5
Xbox 360 E Front Panel Replacement: paso 0, imagen 1 de 2 Xbox 360 E Front Panel Replacement: paso 0, imagen 2 de 2

  • Continue to run the spudger along the crease to release any further clips that may still be attatched.

  • Do not pull off the panel too fast because you don't want to damage the ribbon cable. Slowly pull away the panel.

  • Now that the front panel has been released from its clips you can pull off the front panel.

Continuez à faire passer le spudger le long du pli pour libérer les autres clips qui pourraient encore être attachés.

Ne retirez pas le panneau trop rapidement car vous ne voulez pas endommager le câble ruban. Retirez lentement le panneau.

Maintenant que le panneau avant a été libéré de ses clips, vous pouvez retirer le panneau avant.

[* black] Continue to run the spudger along the crease to release any further clips that may still be attatched.
-[* icon_caution] Do no pull off the panel too fast because you don't want to damage the ribbon cable. Slowly pull away the panel.
+[* icon_caution] Do not pull off the panel too fast because you don't want to damage the ribbon cable. Slowly pull away the panel.
[* black] Now that the front panel has been released from its clips you can pull off the front panel.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.