Aviso: Ahora estás editando un requisito previo de la guía que estabas viendo. Cualquier cambio que realices afectará a todas las 3 guías que incluyen este paso.
Traduciendo paso 1
Paso 1
-
Flip the skateboard back over.
-
Remove the six 22 mm bolts indicated on the top side of the skateboard with a 3 mm Allen key.
-
While holding the nut from the underside of the skateboard remove the four 32 mm bolts with the 3 mm Allen key.
-
Separate the trucks and control module from the board.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.