Aviso: Estás editando un prerrequisito para la guía que estabas viendo. Cualquier cambio que realices afectará a la guía que incluye este paso.
Traduciendo paso 2
Paso 2
-
Lift the two wires and plastic piece away from the Wi-Fi board.
-
Remove the single 3 mm screw holding the Wi-Fi board in place using a Phillips #0 screwdriver.
-
Hold the sides of the Wi-Fi board and slide it out of the socket.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.