Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará la guía que incluye este paso.
Traduciendo paso 1
Paso 1
-
Remove six 4 mm screws using a JIS #0 screwdriver.
-
Insert the flat end of a spudger in the gap between the motherboard and the rest of the mouse.
-
Slowly pry up the edge of the board, moving around the mouse slowly in a counterclockwise direction.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.