Saltar al contenido principal

Kobo Clara Colour 전원 버튼 보드 교체

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 4 guías que incluyen este paso.

Inglés
Coreano
Paso 8
Kobo Clara Colour Power Button Board Replacement, Soften the power button board adhesive: paso 0, imagen 1 de 1
Soften the power button board adhesive
  • The adhesive securing the power button board is strong and requires time and patience to separate properly. Follow the next four steps closely to avoid damaging the power button board.

  • Heat an iOpener and lay it on the power button board for 90 seconds to soften the adhesive.

  • Alternatively, you can use a hair dryer or a heat gun.

전원 버튼 보드를 고정하는 접착제는 강력하기 때문에 제대로 분리하려면 시간과 인내심이 필요합니다. 전원 버튼 보드가 손상되지 않도록 다음 네 단계를 주의 깊게 따르세요.

iOpener를 가열하여 전원 버튼 보드에 90초 동안 올려놓아 코팅을 부드럽게 하세요.

대안으로 헤어 드라이어나 열선 총을 사용할 수도 있습니다.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.