Saltar al contenido principal

Changement circuit imprimé du bouton de marche Kobo Clara Colour

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 4 guías que incluyen este paso.

Inglés
Francés
Paso 8
Kobo Clara Colour Power Button Board Replacement, Soften the power button board adhesive: paso 0, imagen 1 de 1
Soften the power button board adhesive
  • The adhesive securing the power button board is strong and requires time and patience to separate properly. Follow the next four steps closely to avoid damaging the power button board.

  • Heat an iOpener and lay it on the power button board for 90 seconds to soften the adhesive.

  • Alternatively, you can use a hair dryer or a heat gun.

L'adhésif qui fixe le circuit imprimé du bouton de marche est tenace. Il faut donc du temps et de la patience pour le décoller correctement. Suivez attentivement les quatre étapes suivantes pour éviter de le casser.

Chauffez un iOpener et posez-le sur le circuit imprimé du bouton de marche pendant 90 secondes, afin de faire ramollir l'adhésif.

Vous pouvez également utiliser un sèche-cheveux ou un pistolet à air chaud.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.