Saltar al contenido principal

Sostituzione scheda pulsante di accensione Kobo Clara Colour

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 4 guías que incluyen este paso.

Inglés
Italiano
Paso 9
Kobo Clara Colour Power Button Board Replacement, Separate the adhesive: paso 0, imagen 1 de 3 Kobo Clara Colour Power Button Board Replacement, Separate the adhesive: paso 0, imagen 2 de 3 Kobo Clara Colour Power Button Board Replacement, Separate the adhesive: paso 0, imagen 3 de 3
Separate the adhesive
  • Insert an arm of pointed tweezers under the edge of the power button board that you separated the coating from.

  • If you're having trouble, reheat the board and try again.

  • Slide the arm along the edge of the board to separate enough adhesive to fit an opening pick under the board.

  • Keep the arm as flat to the frame as possible to avoid scratching the metal.

Inserisci un braccio delle pinzette a punta da sotto il bordo della scheda del pulsante di accensione da cui hai separato il rivestimento.

Se stai avendo difficoltà, scalda di nuovo la scheda e riprova.

Fai scorrere il braccio lungo il bordo della scheda per separare abbastanza adesivo da riuscire a inserire un plettro di apertura sotto la scheda.

Tieni il braccio il più piatto possibile contro il telaio per evitare di graffiare il metallo.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.