Repara tus cosas Comunidad Tienda

断开主板连接

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará la guía que incluye este paso.

Volver a la Guía
Inglés
Chino
Paso 6
Motherboard Disconnection: paso 0, imagen 1 de 3 Motherboard Disconnection: paso 0, imagen 2 de 3 Motherboard Disconnection: paso 0, imagen 3 de 3

  • Because of the awkward angle, this step requires some patience to avoid tearing the cables. Work slowly and apply heat regularly.

  • Use blunt nose tweezers to pull the cables away from their ZIF connectors slowly and steadily at a level angle to separate the coating.

  • Gripping the tweezers closer to the tip can help get a tighter hold on the cables.

  • Keep pulling on the cables until they're completely disconnected.

  • During reassembly:

  • Inspect the ends of the cables and the ZIF connectors for any remaining coating that could prevent a good connection.

  • Peel off the coating, heating the cable and the ZIF connectors when the coating becomes too brittle.

  • It doesn't have to look pretty! You just need to remove enough coating to have the cables sit properly in their connectors.

由于角度不佳，这一步骤需要一些耐心，以免撕裂排线。操作时要缓慢，并定期加热。

使用钝头镊子以水平角度缓慢而稳定地将排线从 ZIF 接口上拉开，以分离涂层。

将镊子靠近尖端握住可以帮助更紧地固定排线。

继续拉排线，直到完全断开。

在重新组装过程中：

检查排线和 ZIF 接口的末端是否有任何残留涂层，以免影响连接。

剥离涂层，在涂层变得太脆时加热排线和 ZIF 接口。

不一定要追求完美！您只需去除足够的涂层，让排线正确地插入接口即可。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.