Repara tus cosas Comunidad Tienda

断开主板连接

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará la guía que incluye este paso.

Volver a la Guía
Inglés
Chino
Paso 2
Motherboard Disconnection, Remove the coating: paso 0, imagen 1 de 3 Motherboard Disconnection, Remove the coating: paso 0, imagen 2 de 3 Motherboard Disconnection, Remove the coating: paso 0, imagen 3 de 3
Remove the coating

  • Use the tip of a spudger to scrape the coating along the ZIF connectors' black locking tabs—enough so you can grab clumps of it with pointed tweezers.

  • Use pointed tweezers to peel off the coating around the black locking tabs and their hinges on the ZIF connector.

  • If the coating becomes too brittle and hard to peel off, reheat the connectors and try again.

  • This is a meticulous process! Failure to remove enough of the coating could damage the locking tab during disconnection, so take your time!

去除涂层

使用撬棒的尖端沿着 ZIF 接口的黑色锁定片刮掉涂层，这样您就可以用尖头镊子抓住它的团块。

使用尖头镊子剥掉 ZIF 接口上黑色锁定片及其铰链周围的涂层。

如果涂层变得太脆且难以剥离，请重新加热接口并重试。

这是一个细致的过程！ 如果未能去除足够的涂层，可能会在断开连接时损坏锁定片，因此请慢慢来！

[title] Remove the coating
-[* black] Use the tip of a spudger to scrape the coating along the ZIF connectors' black locking tabs—enough so you can grab clumps of it with pointed tweezers.
+[* black] Use the tip of a spudger to scrape the coating along the ZIF connectors' black locking tabs—enough so you can grab clumps of it with [product|IF145-020-2|pointed tweezers].
[* black] Use pointed tweezers to peel off the coating around the black locking tabs and their hinges on the ZIF connector.
[* icon_note] If the coating becomes too brittle and hard to peel off, reheat the connectors and try again.
[* icon_caution] This is a meticulous process! Failure to remove enough of the coating could damage the locking tab during disconnection, so take your time!

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.