Saltar al contenido principal

마더보드 연결 해제

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará la guía que incluye este paso.

Inglés
Coreano
Paso 2
Motherboard Disconnection, Remove the coating: paso 0, imagen 1 de 3 Motherboard Disconnection, Remove the coating: paso 0, imagen 2 de 3 Motherboard Disconnection, Remove the coating: paso 0, imagen 3 de 3
Remove the coating
  • Use the tip of a spudger to scrape the coating along the ZIF connectors' black locking tabs—enough so you can grab clumps of it with pointed tweezers.

  • Use pointed tweezers to peel off the coating around the black locking tabs and their hinges on the ZIF connector.

  • If the coating becomes too brittle and hard to peel off, reheat the connectors and try again.

  • This is a meticulous process! Failure to remove enough of the coating could damage the locking tab during disconnection, so take your time!

스퍼저의 끝을 사용하여 ZIF 커넥터의 검은색 잠금 탭을 따라 코팅을 긁어서 뾰족한 핀셋으로 코팅 덩어리를 잡을 수 있을 정도로 긁어내세요.

ZIF 커넥터의 검은색 잠금 탭과 힌지 주변의 코팅을 뾰족한 핀셋으로 벗겨내세요.

코팅이 너무 부스러져서 잘 벗겨지지 않으면 커넥터를 다시 가열한 후 다시 시도하세요.

이 과정은 매우 세심한 작업입니다! 코팅을 충분히 벗기지 않으면 연결 해제하는 도중 잠금 탭이 손상될 수 있으니 천천히 하세요!

[title] Remove the coating
-[* black] Use the tip of a spudger to scrape the coating along the ZIF connectors' black locking tabs—enough so you can grab clumps of it with pointed tweezers.
+[* black] Use the tip of a spudger to scrape the coating along the ZIF connectors' black locking tabs—enough so you can grab clumps of it with [product|IF145-020-2|pointed tweezers].
[* black] Use pointed tweezers to peel off the coating around the black locking tabs and their hinges on the ZIF connector.
[* icon_note] If the coating becomes too brittle and hard to peel off, reheat the connectors and try again.
[* icon_caution] This is a meticulous process! Failure to remove enough of the coating could damage the locking tab during disconnection, so take your time!

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.