Saltar al contenido principal

Akku abtrennen

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 6 guías que incluyen este paso.

Inglés
Alemán

Traduciendo paso 2

Paso 2
Battery Disconnection, Disconnect the battery: paso 0, imagen 1 de 2 Battery Disconnection, Disconnect the battery: paso 0, imagen 2 de 2
Disconnect the battery
  • Use a spudger to pry up and disconnect the battery press connector.

  • Don't pry against the motherboard, as you risk breaking small, surface-mounted components.

  • Your E-ink screen will continue to say Powered off even after disconnection—this is normal!

Heble den Druckstecker des Akkus mit einem Spudger hoch und trenne ihn ab.

Heble nicht gegen das Motherboard, da du sonst Gefahr läufst, kleine, oberflächenmontierte Bauteile zu beschädigen.

Dein E-Ink Display wird auch nach dem Abtrennen des Akku noch Powered off / Abgeschaltet anzeigen, das ist normal!

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.