Repara tus cosas Comunidad Tienda

Cómo usar el Anti-Clamp en superficies difíciles

Inglés
Español

Información de Guía

= Hecho = Incompleto
How to Use the Anti-Clamp on Difficult SurfacesSuction Tape
    Follow these instructions to use thesuction tape during Anti-Clamp on difficult surfacesopening procedures.
    Difficult surfaces can be broken screens, slippery back covers, or anything that prevents the Anti-Clamp from securing properly. The heat-resistant tape included with your Anti-Clamp will help create a grippier surface for the Anti-Clamp's suction cups to hold onto.
    Suction tape has two uses: to buffer a difficult surface and to secure one side of a two-panel device. If you don't have the suction tape included with the Anti-Clamp, you can also use smooth adhesive strips like packing tape.
    ***Note:*** The included tape can be reused a few times before losing its stickiness.
    Difficult surfaces can be broken screens, slippery back covers, or anything that prevents the Anti-Clamp from securing properly.
    Most devices open from only one side (or "panel")—but some, like the [[Topic:iPhone 14|iPhone 14|new_window=true]], give you the option of opening either side. Since the Anti-Clamp pulls on both sides simultaneously, it may accidentally separate the wrong side, or both sides.
    ***Note:*** this guide uses the iPhone 14 as an example; your device may vary in length, roundness, and button placement, but the procedure should be the same.
      To reassemble your device, follow these instructions in reverse order.
      For other general electronics skills guides, click [[Topic:Electronics Skills|here|new_window=true]].

      Pasos de la guía

      Paso 1

      Paso 2 — Medir la cinta

      Mide la longitud de cinta que quieras y márcala con un bolígrafo. Considera lo siguiente:

      Paso 3 — Corta la cinta

      Usa tijeras para cortar la cinta a la longitud deseada.

      Paso 4 — Pelar la cinta

      Retira la cinta de su revestimiento de plástico.

      Paso 5 — Aplicar la cinta

      Aplica la cinta al panel de tu dispositivo donde colocarás el Anti-Clamp.

      Paso 6 — Asegura la cinta

      Usa el extremo plano de un spudger, o tu dedo, para asegurar completamente la cinta a tu dispositivo.

      Paso 7 — Abrir el dispositivo

      Repite el proceso de medición, corte y aplicación de la cinta para el lado opuesto de tu dispositivo.

      Paso 8

      Paso 9

      Paso 10

      Paso 11

      Paso 12

      Paso 13

      Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.